200L Motor Frame Dimensions

Motor Frame Sizes · IEC 60072-1 (mm)

The 200L frame (IEC 60072-1, mm) has a shaft height of 200 mm (7.874 in) and a 55 mm (2.165 in) shaft 110 mm (4.331 in) long. Foot holes: 318 mm (12.520 in) across × 305 mm (12.008 in) along, the first one 133 mm (5.236 in) from the shaft shoulder; hole diameter 18.5 mm (0.728 in).

HShaft height (IEC H / NEMA D)
200 mm7.874 in7.874 in200 mm
DShaft diameter (IEC D / NEMA U)
55 mm2.165 in2.165 in55 mm
AFoot holes across (IEC A / NEMA 2E)
318 mm12.520 in12.520 in318 mm
BFoot holes along (IEC B / NEMA 2F)
305 mm12.008 in12.008 in305 mm

Drawing

Drive-end viewA = 318 mmA = 12.520 inH = 200 mmH = 7.874 in
Side viewB = 305 mmB = 12.008 inC = 133 mmC = 5.236 inE = 110 mmE = 4.331 in⌀D = 55 mm⌀D = 2.165 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

200L specifications

HShaft height (IEC H / NEMA D)200 mm7.874 in
AFoot holes across (IEC A / NEMA 2E)318 mm12.520 in
BFoot holes along (IEC B / NEMA 2F)305 mm12.008 in
CShaft shoulder to first hole (IEC C / NEMA BA)133 mm5.236 in
KFoot bolt hole (IEC K / NEMA H)18.5 mm0.728 in
DShaft diameter (IEC D / NEMA U)55 mm2.165 in
EShaft extension (IEC E / NEMA N-W)110 mm4.331 in

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.