449T Motor Frame Dimensions
Motor Frame Sizes · NEMA MG 1 (inch)
The 449T frame (NEMA MG 1, inch) has a shaft height of 11 in (279.4 mm) and a 3 3/8 in (85.7 mm) shaft 8 1/2 in (215.9 mm) long. Foot holes: 18 in (457.2 mm) across × 25 in (635 mm) along, the first one 7 1/2 in (190.5 mm) from the shaft shoulder; hole diameter 0.813 in (20.6 mm).
- HShaft height (IEC H / NEMA D)
- 279.4 mm11 in11 in279.4 mm
- DShaft diameter (IEC D / NEMA U)
- 85.7 mm3 3/8 in3 3/8 in85.7 mm
- AFoot holes across (IEC A / NEMA 2E)
- 457.2 mm18 in18 in457.2 mm
- BFoot holes along (IEC B / NEMA 2F)
- 635 mm25 in25 in635 mm
Drawing
449T specifications
| HShaft height (IEC H / NEMA D) | 279.4 mm11 in |
|---|---|
| AFoot holes across (IEC A / NEMA 2E) | 457.2 mm18 in |
| BFoot holes along (IEC B / NEMA 2F) | 635 mm25 in |
| CShaft shoulder to first hole (IEC C / NEMA BA) | 190.5 mm7 1/2 in |
| KFoot bolt hole (IEC K / NEMA H) | 20.6 mm0.813 in |
| DShaft diameter (IEC D / NEMA U) | 85.7 mm3 3/8 in |
| EShaft extension (IEC E / NEMA N-W) | 215.9 mm8 1/2 in |
Same shaft height, other foot length
Similar shaft height in the other system
All motor frames
Sources
- IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
- NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
- Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
- Motion Industries: NEMA quick reference chart
- Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
- ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.