280S Motor Frame Dimensions

Motor Frame Sizes · IEC 60072-1 (mm)

The 280S frame (IEC 60072-1, mm) has a shaft height of 280 mm (11.024 in) and a 75 mm (2.953 in) shaft 140 mm (5.512 in) long. Foot holes: 457 mm (17.992 in) across × 368 mm (14.488 in) along, the first one 190 mm (7.480 in) from the shaft shoulder; hole diameter 24 mm (0.945 in).

HShaft height (IEC H / NEMA D)
280 mm11.024 in11.024 in280 mm
DShaft diameter (IEC D / NEMA U)
75 mm2.953 in2.953 in75 mm
AFoot holes across (IEC A / NEMA 2E)
457 mm17.992 in17.992 in457 mm
BFoot holes along (IEC B / NEMA 2F)
368 mm14.488 in14.488 in368 mm

Drawing

Drive-end viewA = 457 mmA = 17.992 inH = 280 mmH = 11.024 in
Side viewB = 368 mmB = 14.488 inC = 190 mmC = 7.480 inE = 140 mmE = 5.512 in⌀D = 75 mm⌀D = 2.953 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

280S specifications

HShaft height (IEC H / NEMA D)280 mm11.024 in
AFoot holes across (IEC A / NEMA 2E)457 mm17.992 in
BFoot holes along (IEC B / NEMA 2F)368 mm14.488 in
CShaft shoulder to first hole (IEC C / NEMA BA)190 mm7.480 in
KFoot bolt hole (IEC K / NEMA H)24 mm0.945 in
DShaft diameter (IEC D / NEMA U)75 mm2.953 in
EShaft extension (IEC E / NEMA N-W)140 mm5.512 in
Shaft diameter, 2-pole (IEC)65 mm2.559 in
Shaft extension, 2-pole (IEC)140 mm5.512 in

Same shaft height, other foot length

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.