PCIe Generations and Slot Sizes: Speed per Lane, ×4, ×16

Each PCIe generation doubles the rate per lane: PCIe 4.0 moves about 2 GB/s per lane and direction, so an ×4 NVMe SSD tops out near 7.9 GB/s and an ×16 graphics slot near 31.5 GB/s; PCIe 5.0 doubles that to 63 GB/s at ×16. All generations use the same slots and are backward compatible.

11 entriesChecked 2026-11-155 sources
PCIe 1.04 GB/sPCIe 2.08 GB/sPCIe 3.015.76 GB/sPCIe 4.031.5 GB/sPCIe 5.063.01 GB/sPCIe 6.0121.01 GB/sPCIe 7.0242 GB/s
Usable GB/s per direction at ×16, linear scale: every generation doubles the previous one.

PCIe chartTap a generation or slot for its full specs

11 of 11
Generation / slotSpecificationTransfer rate (GT/s)EncodingPer laneGB/s×4 linkGB/s×16 linkGB/sLanesContacts (both sides)LSlot lengthmmin
Generations (per direction)
PCIe 1.020032.58b/10b0.2514———
PCIe 2.0200758b/10b0.528———
PCIe 3.020108128b/130b0.9853.9415.8———
PCIe 4.0201716128b/130b1.9697.8831.5———
PCIe 5.0201932128b/130b3.93815.7563———
PCIe 6.0202264FLIT (242B/256B) + FEC7.56330.25121———
PCIe 7.02025128FLIT (242B/256B) + FEC15.12560.5242———
Slot sizes (CEM connector)
PCIe ×1 slot——————136250.98
PCIe ×4 slot——————464391.54
PCIe ×8 slot——————898562.20
PCIe ×16 slot——————16164893.50

GT/s, GB/s and lanes

GT/s (gigatransfers per second) is the raw signalling rate of one lane. What reaches the device is smaller because of the line code: PCIe 1.0 and 2.0 send 10 bits for every 8 (8b/10b, 20 % loss), PCIe 3.0–5.0 send 130 bits for 128 (1.5 % loss). PCIe 6.0 and 7.0 switch to PAM4 signalling (two bits per symbol) and fixed-size FLIT packets with forward error correction.

The GB/s figures here are per direction. A lane is a pair of differential pairs, one each way, so a link can move the same amount in both directions at once; marketing figures that say "128 GB/s for PCIe 5.0 ×16" add both directions.

×1, ×4, ×8, ×16 is the number of lanes. A link runs at the lower generation and the narrower width of the two ends: a PCIe 4.0 ×4 SSD in a PCIe 3.0 ×4 M.2 slot runs at 3.0 speed (about 3.9 GB/s).

About PCIe Generations

PCIe is backward and forward compatible within a slot: any card fits and works in a slot of its size or larger, at the highest generation both support. Physically, a shorter card goes into a longer slot (×1 card in an ×16 slot), and open-ended slots also take longer cards. A full-length ×16 slot is often wired with fewer lanes; check the board manual for "×16 (×4 mode)".

M.2 NVMe slots are PCIe ×4 (M key) or ×2 links, and the U.2/U.3 and EDSFF server drives are ×4 as well. Graphics cards use ×16, though many mid-range cards are wired ×8; in games the difference between PCIe 4.0 and 5.0 is usually a few percent at most.

PCIe 6.0 (2022) and 7.0 (2025) are mostly data-centre generations today: AI accelerators, 800G network cards and CXL memory expansion. PCI-SIG has started work on PCIe 8.0 at 256 GT/s.

Usable throughput by link width (GB/s per direction)

Generation×1×2×4×8×16
PCIe 1.00.250.51.02.04.0
PCIe 2.00.51.02.04.08.0
PCIe 3.00.9851.973.947.8815.75
PCIe 4.01.973.947.8815.7531.5
PCIe 5.03.947.8815.7531.563.0
PCIe 6.07.5615.130.360.5121
PCIe 7.015.130.360.5121242

Slot power

The CEM specification limits slot power: an ×16 graphics slot supplies up to 75 W (66 W from 12 V, the rest from 3.3 V); ×1 and ×4 slots are typically limited to 25 W, and an ×1 card may draw only 10 W until configured. Cards that need more use the 6-pin, 8-pin or 12V-2×6 auxiliary connectors.

Questions

How fast is PCIe 4.0 ×4?

About 7.88 GB/s per direction (16 GT/s × 4 lanes × 128/130 ÷ 8). That is the ceiling for a PCIe 4.0 NVMe SSD; the fastest drives read at about 7.4 GB/s.

Can I put a PCIe 5.0 card in a PCIe 4.0 or 3.0 slot?

Yes. PCIe is backward compatible: the card works at the highest generation both ends support. A PCIe 5.0 graphics card in a PCIe 4.0 ×16 slot runs at 31.5 GB/s instead of 63 GB/s.

How long is a PCIe ×16 slot?

The ×16 connector is 89 mm long with 164 contacts (82 per side). ×1 is 25 mm (36 contacts), ×4 39 mm (64) and ×8 56 mm (98).

Can an ×16 card go into an ×4 or ×1 slot?

Only if the slot is open-ended (the far end of the slot is cut away). The card then runs with the slot's lane count. Electrically every PCIe card must work at ×1.

What is the difference between GT/s and GB/s?

GT/s is the raw signalling rate of one lane; GB/s is the usable data after coding, divided by 8 bits. For PCIe 3.0 to 5.0, GB/s per lane ≈ GT/s × 0.123.

Sources

  1. PCI-SIG: PCI Express Base Specification revisions 1.0a to 7.0 (announcements and FAQ)
  2. PCI-SIG: PCIe 7.0 specification released, 128 GT/s (June 2025)
  3. PCI-SIG: PCI Express Card Electromechanical (CEM) Specification 5.1
  4. Thomas-Krenn wiki: PCI Express (slot lengths ×1 25 mm … ×16 89 mm)
  5. Wikipedia: PCI Express (throughput table, connector pin counts)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.