NPS 2 Butt-Weld Fitting Dimensions
Butt-Weld Fittings
For NPS 2 butt-weld fittings (pipe OD 2.375 in / 60.3 mm): a 90° long-radius elbow is 3.00 in (76.2 mm) centre to end, a 45° elbow 1.38 in (35.1 mm), and a straight tee 2.50 in (63.5 mm) centre to end of run and outlet. The values come from ASME B16.9 and are the same for every schedule.
- A90° elbow, long radius (centre to end)
- 76.2 mm3.00 in3.00 in76.2 mm
- B45° elbow, long radius (centre to end)
- 35.1 mm1.38 in1.38 in35.1 mm
- CTee, centre to end of run
- 63.5 mm2.50 in2.50 in63.5 mm
- HReducer, end to end
- 76.2 mm3.00 in3.00 in76.2 mm
Drawing
NPS 2 specifications
| DN (metric nominal) | 50 |
|---|---|
| ODPipe outside diameter | 2.375 in60.3 mm |
| A90° elbow, long radius (centre to end) | 3.00 in76.2 mm |
| A90° elbow, short radius (centre to end) | 2.00 in50.8 mm |
| B45° elbow, long radius (centre to end) | 1.38 in35.1 mm |
| CTee, centre to end of run | 2.50 in63.5 mm |
| MTee, centre to end of outlet | 2.50 in63.5 mm |
| HReducer, end to end | 3.00 in76.2 mm |
| ECap length (standard wall) | 1.50 in38.1 mm |
| E₁Cap length (heavy wall) | 1.75 in44.4 mm |
The most common size in plant piping. A 2" LR elbow is 3.00" centre to end, an SR elbow 2.00"; a 2" tee is 2.50" centre to each end.
Pipe of this size
Flanges of this size
All Butt-Weld Fittings sizes
Sources
- ASME B16.9-2018: Factory-Made Wrought Buttwelding Fittings
- ASME B16.9-2003 (incorporated by reference, public copy): law.resource.org
- pipedata.org: Straight tee, concentric reducer and cap dimensions, ASME B16.9
- Ferrobend: ANSI/ASME B16.9 fitting dimension tables (mm)
- pipingengineer.org: Butt weld cap inch dimensions per ASME B16.9
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.