NPS 2 Pipe Dimensions (DN 50)

Pipe Sizes

NPS 2 (DN 50) steel pipe has an outside diameter of 2.375 in (60.3 mm) in every schedule. In Schedule 40 the wall is 0.154 in (3.91 mm), giving an inside diameter of 2.067 in (52.50 mm); in Schedule 80 the wall is 0.218 in (5.54 mm) and the ID 1.939 in (49.25 mm).

ODOutside diameter
60.3 mm2.375 in2.375 in60.3 mm
IDInside diameter, SCH 40
52.50 mm2.067 in2.067 in52.50 mm
tWall, SCH 40
3.91 mm0.154 in0.154 in3.91 mm
Weight, SCH 40
5.45 kg/m3.66 lb/ft3.66 lb/ft5.45 kg/m

Drawing

⌀60.3 mm⌀2.375 in⌀52.5 mm⌀2.067 int = 3.91 mmt = 0.154 inSection shown: SCH 40
Wall by schedule (enlarged)5S1.65 mm0.065 in10S2.77 mm0.109 in403.91 mm0.154 in805.54 mm0.218 in1608.74 mm0.344 inXXS11.07 mm0.436 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 2 specifications

DN (metric nominal)50
ODOutside diameter2.375 in60.3 mm
tWall, SCH 5S0.065 in1.65 mm
tWall, SCH 10S0.109 in2.77 mm
tWall, SCH 400.154 in3.91 mm
tWall, STD0.154 in3.91 mm
tWall, SCH 800.218 in5.54 mm
tWall, XS (extra strong)0.218 in5.54 mm
tWall, SCH 1600.344 in8.74 mm
tWall, XXS0.436 in11.07 mm
IDInside diameter, SCH 5S2.245 in57.02 mm
IDInside diameter, SCH 10S2.157 in54.79 mm
IDInside diameter, SCH 402.067 in52.50 mm
IDInside diameter, SCH 801.939 in49.25 mm
IDInside diameter, SCH 1601.687 in42.85 mm
IDInside diameter, XXS1.503 in38.18 mm
Weight, SCH 403.66 lb/ft5.45 kg/m
Weight, SCH 805.03 lb/ft7.49 kg/m

NPS 2 is the most common size for service mains and fire sprinkler risers. Note that the European DN 50 tube in EN 10255 has the same 60.3 mm OD.

Also known as

DN502"50A

Pipe thread for NPS 2

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.