NPS 1-1/2 Pipe Dimensions (DN 40)

Pipe Sizes

NPS 1-1/2 (DN 40) steel pipe has an outside diameter of 1.900 in (48.3 mm) in every schedule. In Schedule 40 the wall is 0.145 in (3.68 mm), giving an inside diameter of 1.610 in (40.89 mm); in Schedule 80 the wall is 0.200 in (5.08 mm) and the ID 1.500 in (38.10 mm).

ODOutside diameter
48.3 mm1.900 in1.900 in48.3 mm
IDInside diameter, SCH 40
40.89 mm1.610 in1.610 in40.89 mm
tWall, SCH 40
3.68 mm0.145 in0.145 in3.68 mm
Weight, SCH 40
4.05 kg/m2.72 lb/ft2.72 lb/ft4.05 kg/m

Drawing

⌀48.3 mm⌀1.900 in⌀40.9 mm⌀1.610 int = 3.68 mmt = 0.145 inSection shown: SCH 40
Wall by schedule (enlarged)5S1.65 mm0.065 in10S2.77 mm0.109 in403.68 mm0.145 in805.08 mm0.200 in1607.14 mm0.281 inXXS10.16 mm0.400 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 1-1/2 specifications

DN (metric nominal)40
ODOutside diameter1.900 in48.3 mm
tWall, SCH 5S0.065 in1.65 mm
tWall, SCH 10S0.109 in2.77 mm
tWall, SCH 400.145 in3.68 mm
tWall, STD0.145 in3.68 mm
tWall, SCH 800.200 in5.08 mm
tWall, XS (extra strong)0.200 in5.08 mm
tWall, SCH 1600.281 in7.14 mm
tWall, XXS0.400 in10.16 mm
IDInside diameter, SCH 5S1.770 in44.96 mm
IDInside diameter, SCH 10S1.682 in42.72 mm
IDInside diameter, SCH 401.610 in40.89 mm
IDInside diameter, SCH 801.500 in38.10 mm
IDInside diameter, SCH 1601.338 in33.99 mm
IDInside diameter, XXS1.100 in27.94 mm
Weight, SCH 402.72 lb/ft4.05 kg/m
Weight, SCH 803.63 lb/ft5.40 kg/m

Also known as

DN401-1/2"40A

Pipe thread for NPS 1-1/2

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.