NPS 1-1/4 Pipe Dimensions (DN 32)

Pipe Sizes

NPS 1-1/4 (DN 32) steel pipe has an outside diameter of 1.660 in (42.2 mm) in every schedule. In Schedule 40 the wall is 0.140 in (3.56 mm), giving an inside diameter of 1.380 in (35.05 mm); in Schedule 80 the wall is 0.191 in (4.85 mm) and the ID 1.278 in (32.46 mm).

ODOutside diameter
42.2 mm1.660 in1.660 in42.2 mm
IDInside diameter, SCH 40
35.05 mm1.380 in1.380 in35.05 mm
tWall, SCH 40
3.56 mm0.140 in0.140 in3.56 mm
Weight, SCH 40
3.38 kg/m2.27 lb/ft2.27 lb/ft3.38 kg/m

Drawing

⌀42.2 mm⌀1.660 in⌀35.1 mm⌀1.380 int = 3.56 mmt = 0.140 inSection shown: SCH 40
Wall by schedule (enlarged)5S1.65 mm0.065 in10S2.77 mm0.109 in403.56 mm0.140 in804.85 mm0.191 in1606.35 mm0.250 inXXS9.70 mm0.382 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 1-1/4 specifications

DN (metric nominal)32
ODOutside diameter1.660 in42.2 mm
tWall, SCH 5S0.065 in1.65 mm
tWall, SCH 10S0.109 in2.77 mm
tWall, SCH 400.140 in3.56 mm
tWall, STD0.140 in3.56 mm
tWall, SCH 800.191 in4.85 mm
tWall, XS (extra strong)0.191 in4.85 mm
tWall, SCH 1600.250 in6.35 mm
tWall, XXS0.382 in9.70 mm
IDInside diameter, SCH 5S1.530 in38.86 mm
IDInside diameter, SCH 10S1.442 in36.63 mm
IDInside diameter, SCH 401.380 in35.05 mm
IDInside diameter, SCH 801.278 in32.46 mm
IDInside diameter, SCH 1601.160 in29.46 mm
IDInside diameter, XXS0.896 in22.76 mm
Weight, SCH 402.27 lb/ft3.38 kg/m
Weight, SCH 803.00 lb/ft4.46 kg/m

Also known as

DN321-1/4"32A

Pipe thread for NPS 1-1/4

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.