NPS 1 Pipe Dimensions (DN 25)

Pipe Sizes

NPS 1 (DN 25) steel pipe has an outside diameter of 1.315 in (33.4 mm) in every schedule. In Schedule 40 the wall is 0.133 in (3.38 mm), giving an inside diameter of 1.049 in (26.64 mm); in Schedule 80 the wall is 0.179 in (4.55 mm) and the ID 0.957 in (24.31 mm).

ODOutside diameter
33.4 mm1.315 in1.315 in33.4 mm
IDInside diameter, SCH 40
26.64 mm1.049 in1.049 in26.64 mm
tWall, SCH 40
3.38 mm0.133 in0.133 in3.38 mm
Weight, SCH 40
2.50 kg/m1.68 lb/ft1.68 lb/ft2.50 kg/m

Drawing

⌀33.4 mm⌀1.315 in⌀26.6 mm⌀1.049 int = 3.38 mmt = 0.133 inSection shown: SCH 40
Wall by schedule (enlarged)5S1.65 mm0.065 in10S2.77 mm0.109 in403.38 mm0.133 in804.55 mm0.179 in1606.35 mm0.250 inXXS9.09 mm0.358 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 1 specifications

DN (metric nominal)25
ODOutside diameter1.315 in33.4 mm
tWall, SCH 5S0.065 in1.65 mm
tWall, SCH 10S0.109 in2.77 mm
tWall, SCH 400.133 in3.38 mm
tWall, STD0.133 in3.38 mm
tWall, SCH 800.179 in4.55 mm
tWall, XS (extra strong)0.179 in4.55 mm
tWall, SCH 1600.250 in6.35 mm
tWall, XXS0.358 in9.09 mm
IDInside diameter, SCH 5S1.185 in30.10 mm
IDInside diameter, SCH 10S1.097 in27.86 mm
IDInside diameter, SCH 401.049 in26.64 mm
IDInside diameter, SCH 800.957 in24.31 mm
IDInside diameter, SCH 1600.815 in20.70 mm
IDInside diameter, XXS0.599 in15.21 mm
Weight, SCH 401.68 lb/ft2.50 kg/m
Weight, SCH 802.17 lb/ft3.23 kg/m

1" pipe measures 1.315 in (33.4 mm) outside. A 1" NPT thread has 11.5 threads per inch.

Also known as

DN251"25A

Pipe thread for NPS 1

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.