NPS 2-1/2 Pipe Dimensions (DN 65)

Pipe Sizes

NPS 2-1/2 (DN 65) steel pipe has an outside diameter of 2.875 in (73.0 mm) in every schedule. In Schedule 40 the wall is 0.203 in (5.16 mm), giving an inside diameter of 2.469 in (62.71 mm); in Schedule 80 the wall is 0.276 in (7.01 mm) and the ID 2.323 in (59.00 mm).

ODOutside diameter
73.0 mm2.875 in2.875 in73.0 mm
IDInside diameter, SCH 40
62.71 mm2.469 in2.469 in62.71 mm
tWall, SCH 40
5.16 mm0.203 in0.203 in5.16 mm
Weight, SCH 40
8.63 kg/m5.80 lb/ft5.80 lb/ft8.63 kg/m

Drawing

⌀73.0 mm⌀2.875 in⌀62.7 mm⌀2.469 int = 5.16 mmt = 0.203 inSection shown: SCH 40
Wall by schedule (enlarged)5S2.11 mm0.083 in10S3.05 mm0.120 in405.16 mm0.203 in807.01 mm0.276 in1609.52 mm0.375 inXXS14.02 mm0.552 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 2-1/2 specifications

DN (metric nominal)65
ODOutside diameter2.875 in73.0 mm
tWall, SCH 5S0.083 in2.11 mm
tWall, SCH 10S0.120 in3.05 mm
tWall, SCH 400.203 in5.16 mm
tWall, STD0.203 in5.16 mm
tWall, SCH 800.276 in7.01 mm
tWall, XS (extra strong)0.276 in7.01 mm
tWall, SCH 1600.375 in9.52 mm
tWall, XXS0.552 in14.02 mm
IDInside diameter, SCH 5S2.709 in68.81 mm
IDInside diameter, SCH 10S2.635 in66.93 mm
IDInside diameter, SCH 402.469 in62.71 mm
IDInside diameter, SCH 802.323 in59.00 mm
IDInside diameter, SCH 1602.125 in53.97 mm
IDInside diameter, XXS1.771 in44.98 mm
Weight, SCH 405.80 lb/ft8.63 kg/m
Weight, SCH 807.67 lb/ft11.41 kg/m

Also known as

DN652-1/2"65A

Pipe thread for NPS 2-1/2

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.