2-1/2-8 NPT Thread Dimensions

Pipe Threads · NPT: American taper pipe thread, ASME B1.20.1

2-1/2-8 NPT (NPT: American taper pipe thread, ASME B1.20.1) has 8 TPI (3.175 mm) and an outside diameter of about 73.025 mm (2.875 in). Thread form: Tapered 1:16 on diameter, 60° flank angle. Engagement length 17.3 mm (0.682 in).

nThreads per inch
3.175 mm8 TPI8 TPI3.175 mm
DOutside diameter (pipe OD / major Ø)
73.025 mm2.875 in2.875 in73.025 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
17.3 mm0.682 in0.682 in17.3 mm
Tap drill (typical)
2-5/8 in (66.7 mm)

Drawing

gauge planeL₁ 17.3 mmL₁ 0.682 in⌀73.025 mm⌀2.875 inTaper 1:16 on diameter (exaggerated)
60°P = 3.175 mmP = 8 TPIFlat crests and roots (NPT)
NPT: 60° thread on a 1:16 taper. L₁ is the hand-tight engagement from the small end to the gauge plane.Proportions shown, not to scale · Dimensions in mmDimensions in inches

2-1/2-8 NPT specifications

nThreads per inch8 TPI3.175 mm
DOutside diameter (pipe OD / major Ø)73.025 mm2.875 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)17.3 mm0.682 in
L₂Effective thread length (L2)28.9 mm1.1375 in
Tap drill (typical)2-5/8 in (66.7 mm)
Thread angle60°
FormTapered 1:16 on diameter

BSP thread of the same nominal size (not interchangeable)

Pipe this thread is cut on

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.