DIN 6799 – 12 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 12 ring (DIN 6799: E-clips, retaining washers) needs a groove 12 mm (0.472 in) in diameter and at least 1.35 mm (0.0531 in) wide. The ring itself is 1.3 mm (0.0512 in) thick.

d2Groove diameter
12 mm0.472 in0.472 in12 mm
mGroove width (min)
1.35 mm0.0531 in0.0531 in1.35 mm
sRing thickness
1.3 mm0.0512 in0.0512 in1.3 mm

Drawing

⌀13 mm⌀0.512 in
m 1.35 mmm 0.0531 int 0.5 mmt 0.0197 ins 1.3 mms 0.0512 inShaft surfacegroove ⌀12 mmgroove ⌀0.472 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 12 specifications

d1Shaft range (E-clip)13–18 mm0.512–0.709 in
d2Groove diameter12 mm0.472 in
mGroove width (min)1.35 mm0.0531 in
sRing thickness1.3 mm0.0512 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.