DIN 6799 – 15 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 15 ring (DIN 6799: E-clips, retaining washers) needs a groove 15 mm (0.591 in) in diameter and at least 1.55 mm (0.0610 in) wide. The ring itself is 1.5 mm (0.0591 in) thick.

d2Groove diameter
15 mm0.591 in0.591 in15 mm
mGroove width (min)
1.55 mm0.0610 in0.0610 in1.55 mm
sRing thickness
1.5 mm0.0591 in0.0591 in1.5 mm

Drawing

⌀16 mm⌀0.630 in
m 1.55 mmm 0.0610 int 0.5 mmt 0.0197 ins 1.5 mms 0.0591 inShaft surfacegroove ⌀15 mmgroove ⌀0.591 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 15 specifications

d1Shaft range (E-clip)16–24 mm0.630–0.945 in
d2Groove diameter15 mm0.591 in
mGroove width (min)1.55 mm0.0610 in
sRing thickness1.5 mm0.0591 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.