DIN 6799 – 19 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 19 ring (DIN 6799: E-clips, retaining washers) needs a groove 19 mm (0.748 in) in diameter and at least 1.8 mm (0.0709 in) wide. The ring itself is 1.75 mm (0.0689 in) thick.

d2Groove diameter
19 mm0.748 in0.748 in19 mm
mGroove width (min)
1.8 mm0.0709 in0.0709 in1.8 mm
sRing thickness
1.75 mm0.0689 in0.0689 in1.75 mm

Drawing

⌀20 mm⌀0.787 in
m 1.8 mmm 0.0709 int 0.5 mmt 0.0197 ins 1.75 mms 0.0689 inShaft surfacegroove ⌀19 mmgroove ⌀0.748 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 19 specifications

d1Shaft range (E-clip)20–31 mm0.787–1.220 in
d2Groove diameter19 mm0.748 in
mGroove width (min)1.8 mm0.0709 in
sRing thickness1.75 mm0.0689 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.