M10×9 Beam Dimensions & Properties
S & M Shapes (AISC) · M shapes: miscellaneous light beams
M10×9 is an AISC M shapes: miscellaneous light beams shape. It is 10 in (254.0 mm) deep with a 2.69 in (68.3 mm) flange, a 0.157 in (4.0 mm) web and an average flange thickness of 0.206 in (5.2 mm), and weighs 9 lb/ft (13.4 kg/m). Area 2.65 in² (1,710 mm²); Ix = 39 in⁴ (1,623.3 cm⁴), Sx = 7.79 in³ (127.7 cm³), Zx = 9.22 in³ (151.1 cm³).
- dDepth
- 254.0 mm10 in10 in254.0 mm
- bfFlange width
- 68.3 mm2.69 in2.69 in68.3 mm
- twWeb thickness
- 4.0 mm0.157 in0.157 in4.0 mm
- tfFlange thickness
- 5.2 mm0.206 in0.206 in5.2 mm
Drawing
M10×9 specifications
| dDepth | 10 in254.0 mm |
|---|---|
| bfFlange width | 2.69 in68.3 mm |
| twWeb thickness | 0.157 in4.0 mm |
| tfFlange thickness | 0.206 in5.2 mm |
| kDesign value | 0.563 in14.3 mm |
| kDetailing value | 9/16 in14.3 mm |
| k1Detailing value | 3/8 in9.5 mm |
| WWeight | 9 lb/ft13.4 kg/m |
| AArea | 2.65 in²1,710 mm² |
| IxMoment of inertia, strong axis | 39 in⁴1,623.3 cm⁴ |
| ZxPlastic modulus, strong axis | 9.22 in³151.1 cm³ |
| SxSection modulus, strong axis | 7.79 in³127.7 cm³ |
| rxRadius of gyration, strong axis | 3.83 in97.3 mm |
| IyMoment of inertia, weak axis | 0.672 in⁴28 cm⁴ |
| ZyPlastic modulus, weak axis | 0.809 in³13.3 cm³ |
| SySection modulus, weak axis | 0.5 in³8.2 cm³ |
| ryRadius of gyration, weak axis | 0.5 in12.8 mm |
| JTorsional constant | 0.031 in⁴1.31 cm⁴ |
| bf/2tfFlange slenderness | 6.53 |
| h/twWeb slenderness | 58.4 |
Shapes of about the same weight in other depths
All S & M Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.