S4×9.5 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S4×9.5 is an AISC S shapes: American Standard beams shape. It is 4 in (101.6 mm) deep with a 2.8 in (71.1 mm) flange, a 0.326 in (8.3 mm) web and an average flange thickness of 0.293 in (7.4 mm), and weighs 9.5 lb/ft (14.1 kg/m). Area 2.79 in² (1,800 mm²); Ix = 6.76 in⁴ (281.4 cm⁴), Sx = 3.38 in³ (55.4 cm³), Zx = 4.04 in³ (66.2 cm³).

dDepth
101.6 mm4 in4 in101.6 mm
bfFlange width
71.1 mm2.8 in2.8 in71.1 mm
twWeb thickness
8.3 mm0.326 in0.326 in8.3 mm
tfFlange thickness
7.4 mm0.293 in0.293 in7.4 mm

Drawing

71.1 mm2.8 in101.6 mm4 intf 7.4 mmtf 0.293 intw 8.3 mmtw 0.326 ink 19.0 mmk 0.75 in
Drawn to scale · Dimensions in mmDimensions in inches

S4×9.5 specifications

dDepth4 in101.6 mm
bfFlange width2.8 in71.1 mm
twWeb thickness0.326 in8.3 mm
tfFlange thickness0.293 in7.4 mm
kDesign value0.75 in19.0 mm
kDetailing value3/4 in19.0 mm
WWeight9.5 lb/ft14.1 kg/m
AArea2.79 in²1,800 mm²
IxMoment of inertia, strong axis6.76 in⁴281.4 cm⁴
ZxPlastic modulus, strong axis4.04 in³66.2 cm³
SxSection modulus, strong axis3.38 in³55.4 cm³
rxRadius of gyration, strong axis1.56 in39.6 mm
IyMoment of inertia, weak axis0.887 in⁴36.9 cm⁴
ZyPlastic modulus, weak axis1.13 in³18.5 cm³
SySection modulus, weak axis0.635 in³10.4 cm³
ryRadius of gyration, weak axis0.56 in14.3 mm
JTorsional constant0.12 in⁴4.99 cm⁴
bf/2tfFlange slenderness4.77
h/twWeb slenderness8.3
Metric designationS100×14.1

Also known as

S100×14.1

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.