Self-Aligning Ball Bearing Size Chart

Self-aligning ball bearings have two rows of balls and a spherical outer raceway, so the inner ring can tilt a few degrees. The 12xx and 13xx series share their envelopes with 62xx and 63xx deep groove ball bearings; 22xx and 23xx are the wider versions. A 2205 is 25 × 52 × 18 mm.

89 sizesChecked 2026-11-154 sources
Shaft ⌀50 mm121090×20221090×231310110×272310110×40
1210, 2210, 1310 and 2310 on the same shaft (upper half sections).Drawn to scale · Dimensions in mmDimensions in inches

Size chartTap a size for its drawing and full specs

89 of 89
BearingdBore diametermminDOutside diametermminBWidthmminSleeve for the K version
Small sizes (1xx)
13550.197190.74860.236—
12660.236190.74860.236—
12770.276220.86670.276—
10880.315220.86670.276—
12990.354261.02480.315—
12 series, light
1200100.394301.18190.354—
1201120.472321.260100.394—
1202150.591351.378110.433—
1203170.669401.575120.472—
1204200.787471.850140.551H204
1205250.984522.047150.591H205
1206301.181622.441160.630H206
1207351.378722.835170.669H207
1208401.575803.150180.709H208
1209451.772853.346190.748H209
1210501.969903.543200.787H210
1211552.1651003.937210.827H211
1212602.3621104.331220.866H212
1213652.5591204.724230.906H213
1214702.7561254.921240.945H214
1215752.9531305.118250.984H215
1216803.1501405.512261.024H216
1217853.3461505.906281.102H217
1218903.5431606.299301.181H218
1219953.7401706.693321.260H219
12201003.9371807.087341.339H220
13 series, medium
1300100.394351.378110.433—
1301120.472371.457120.472—
1302150.591421.654130.512—
1303170.669471.850140.551—
1304200.787522.047150.591H304
1305250.984622.441170.669H305
1306301.181722.835190.748H306
1307351.378803.150210.827H307
1308401.575903.543230.906H308
1309451.7721003.937250.984H309
1310501.9691104.331271.063H310
1311552.1651204.724291.142H311
1312602.3621305.118311.220H312
1313652.5591405.512331.299H313
1314702.7561505.906351.378H314
1315752.9531606.299371.457H315
1316803.1501706.693391.535H316
1317853.3461807.087411.614H317
1318903.5431907.480431.693H318
1319953.7402007.874451.772H319
13201003.9372158.465471.850H320
22 series, light, wide
2200100.394301.181140.551—
2201120.472321.260140.551—
2202150.591351.378140.551—
2203170.669401.575160.630—
2204200.787471.850180.709H304
2205250.984522.047180.709H305
2206301.181622.441200.787H306
2207351.378722.835230.906H307
2208401.575803.150230.906H308
2209451.772853.346230.906H309
2210501.969903.543230.906H310
2211552.1651003.937250.984H311
2212602.3621104.331281.102H312
2213652.5591204.724311.220H313
2214702.7561254.921311.220H314
2215752.9531305.118311.220H315
2216803.1501405.512331.299H316
2217853.3461505.906361.417H317
2218903.5431606.299401.575H318
2219953.7401706.693431.693H319
22201003.9371807.087461.811H320
23 series, medium, wide
2300100.394351.378170.669—
2301120.472371.457170.669—
2302150.591421.654170.669—
2303170.669471.850190.748—
2304200.787522.047210.827H2304
2305250.984622.441240.945H2305
2306301.181722.835271.063H2306
2307351.378803.150311.220H2307
2308401.575903.543331.299H2308
2309451.7721003.937361.417H2309
2310501.9691104.331401.575H2310
2311552.1651204.724431.693H2311
2312602.3621305.118461.811H2312
2313652.5591405.512481.890H2313
2314702.7561505.906512.008H2314
2315752.9531606.299552.165H2315
2316803.1501706.693582.283H2316
2317853.3461807.087602.362H2317
2318903.5431907.480642.520H2318
2319953.7402007.874672.638H2319
23201003.9372158.465732.874H2320

How to read a self-aligning ball bearing number

2205 EKTN9: 2 = width series (wide), 2 = diameter series (light), 05 = bore code (× 5 = 25 mm). For the narrow series the first digit is 1: 1205 (light), 1305 (medium). The type has no separate digit: 12xx, 13xx, 22xx and 23xx are self-aligning ball bearings by convention. Small sizes 126, 127, 129 and 135 give the bore directly in the last digit(s): 126 = 6 mm, 135 = 5 mm; 108 = 8 mm.

E = optimised internal design (SKF), TN9 / TVH = polyamide cage, M = brass cage, K = tapered bore 1:12 for an adapter sleeve, 2RS / E-2RS1 = sealed. C3 = more clearance. Sealed versions of some sizes are wider than open ones, so check before replacing an open bearing with a sealed one.

About Self-Aligning Ball Bearings

The two ball rows run in a common spherical raceway in the outer ring. The inner ring, balls and cage can therefore tilt (about 2.5–3° for 12/13 series and 1.5–2.5° for 22/23 series in normal use) without the balls being pinched. That makes the bearing forgiving of long, flexible shafts and separately mounted housings: line shafts, agricultural machinery, fans and textile machines.

The price is load capacity: the balls touch a sphere on the outer ring, so the contact is less conformal than in a deep groove bearing and the radial rating is lower. Axial load capacity is small. Where loads are high, a spherical roller bearing does the same job.

K bearings (tapered bore) are often mounted on an adapter sleeve on a plain drawn shaft, with no shoulder and no tight shaft tolerance needed. That is the classic arrangement in plummer block housings.

Adapter sleeves

12xx K uses H2xx, 13xx K and 22xx K use H3xx, 23xx K uses H23xx. The sleeve bore (the shaft) is smaller than the bearing bore: 1205 K + H205 and 2205 K + H305 both fit a 20 mm shaft.

Questions

What size is a 1205 bearing?

25 mm bore, 52 mm outside diameter, 15 mm wide, the same envelope as a 6205. A 2205 has the same bore and OD but is 18 mm wide.

How much misalignment does a self-aligning ball bearing allow?

Around 2.5–3° for the 12 and 13 series and 1.5–2.5° for the 22 and 23 series in normal operation, less for sealed versions. Makers list the value per bearing.

Which adapter sleeve fits a 1206 K?

H206, for a 25 mm shaft. 2206 K and 1306 K take H306, 2306 K takes H2306, all for a 25 mm shaft.

Can a self-aligning ball bearing replace a deep groove ball bearing?

12xx and 13xx have the same envelope as 62xx and 63xx, so they fit. They carry less load, especially axially, but tolerate misalignment.

Sources

  1. ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
  2. DIN 630: Self-aligning ball bearings, double row
  3. SKF: Self-aligning ball bearings, product tables (12, 13, 22, 23 series, E-2RS1)
  4. Schaeffler (FAG) medias: self-aligning ball bearings 12, 13, 22, 23 (-TVH, -K)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.