M1.6 Set Screw Dimensions
Set Screws
An M1.6 socket set screw takes a 0.7 mm (0.028 in) hex key in every point style. The flat and dog points are up to 0.8 mm (0.031 in) in diameter, the cup point 0.8 mm (0.031 in), and the cone point ends in a 0.4 mm (0.0157 in) flat. The long dog point is at least 0.8 mm (0.0315 in) long.
- sHex key size
- 0.7 mm0.028 in0.028 in0.7 mm
- dpFlat / dog point dia. (max)
- 0.8 mm0.031 in0.031 in0.8 mm
- dzCup point dia. (max)
- 0.8 mm0.031 in0.031 in0.8 mm
- dtCone point tip dia. (max)
- 0.4 mm0.0157 in0.0157 in0.4 mm
Drawing
M1.6 specifications
| dMajor diameter | 1.6 mm0.063 in |
|---|---|
| PPitch | 0.35 mm0.0138 in |
| sHex key size | 0.7 mm0.028 in |
| dpFlat / dog point dia. (max) | 0.8 mm0.031 in |
| dtCone point tip dia. (max) | 0.4 mm0.0157 in |
| dzCup point dia. (max) | 0.8 mm0.031 in |
| z1Dog length, short (min) | 0.4 mm0.0157 in |
| z2Dog length, long (min) | 0.8 mm0.0315 in |
Also known as
M1.6x0.35
Hex key for the M1.6
M1.6 in other charts
All Set Screws sizes
Sources
- ISO 4026 / 4027 / 4028 / 4029: Hexagon socket set screws with flat, cone, dog and cup point
- Westfield Fasteners: ISO 4026 (DIN 913) flat point set screw dimensions
- Westfield Fasteners: ISO 4027 (DIN 914) cone point set screw dimensions
- Westfield Fasteners: ISO 4028 (DIN 915) dog point set screw dimensions
- Westfield Fasteners: ISO 4029 (DIN 916) cup point set screw dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.