M10 Set Screw Dimensions
Set Screws
An M10 socket set screw takes a 5 mm (0.197 in) hex key in every point style. The flat and dog points are up to 7 mm (0.276 in) in diameter, the cup point 6 mm (0.236 in), and the cone point ends in a 2.5 mm (0.0984 in) flat. The long dog point is at least 5 mm (0.1969 in) long.
- sHex key size
- 5 mm0.197 in0.197 in5 mm
- dpFlat / dog point dia. (max)
- 7 mm0.276 in0.276 in7 mm
- dzCup point dia. (max)
- 6 mm0.236 in0.236 in6 mm
- dtCone point tip dia. (max)
- 2.5 mm0.0984 in0.0984 in2.5 mm
Drawing
M10 specifications
| dMajor diameter | 10 mm0.394 in |
|---|---|
| PPitch | 1.5 mm0.0591 in |
| sHex key size | 5 mm0.197 in |
| dpFlat / dog point dia. (max) | 7 mm0.276 in |
| dtCone point tip dia. (max) | 2.5 mm0.0984 in |
| dzCup point dia. (max) | 6 mm0.236 in |
| z1Dog length, short (min) | 2.5 mm0.0984 in |
| z2Dog length, long (min) | 5 mm0.1969 in |
Also known as
M10x1.5
Hex key for the M10
M10 in other charts
All Set Screws sizes
Sources
- ISO 4026 / 4027 / 4028 / 4029: Hexagon socket set screws with flat, cone, dog and cup point
- Westfield Fasteners: ISO 4026 (DIN 913) flat point set screw dimensions
- Westfield Fasteners: ISO 4027 (DIN 914) cone point set screw dimensions
- Westfield Fasteners: ISO 4028 (DIN 915) dog point set screw dimensions
- Westfield Fasteners: ISO 4029 (DIN 916) cup point set screw dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.