M10 Countersunk Screw Dimensions
Countersunk Screws
Head dimensions of the M10 countersunk screw (90° head) in each standard that covers this size: hex socket ISO 10642 and DIN 7991, cross recessed ISO 7046 and DIN 965. A value that is missing below does not exist for M10 in that standard. The hex socket versions start at M3, the cross recessed ones end at M10.
- dkHead dia. ISO 10642 (theor. max)
- 22.4 mm0.8819 in0.8819 in22.4 mm
- kHead height ISO 10642 (max)
- 6.2 mm0.2441 in0.2441 in6.2 mm
- sHex key ISO 10642 / DIN 7991
- 6 mm0.236 in0.236 in6 mm
- Head dia. ISO 7046 (max)
- 18.3 mm0.720 in0.720 in18.3 mm
Drawing
M10 specifications
| dMajor diameter | 10 mm0.394 in |
|---|---|
| PPitch | 1.5 mm0.0591 in |
| dkHead dia. ISO 10642 (theor. max) | 22.4 mm0.8819 in |
| Head dia. ISO 10642 (actual min) | 19.22 mm0.7567 in |
| kHead height ISO 10642 (max) | 6.2 mm0.2441 in |
| sHex key ISO 10642 / DIN 7991 | 6 mm0.236 in |
| Head dia. DIN 7991 | 20 mm0.787 in |
| Head height DIN 7991 | 5.5 mm0.2165 in |
| Head dia. ISO 7046 (max) | 18.3 mm0.720 in |
| Head height ISO 7046 (max) | 5 mm0.1969 in |
| Cross recess ISO 7046 | PH4 / PZ4 |
| Head dia. DIN 965 | 18 mm0.709 in |
| Head height DIN 965 | 5 mm0.1969 in |
Also known as
M10x1.5
Hex key for the M10
M10 in other charts
All Countersunk Screws sizes
Sources
- ISO 10642:2019, Hexagon socket countersunk head screws with reduced loadability
- ISO 7046-1:2011, Cross-recessed countersunk flat head screws (common head), steel 4.8
- Westfield Fasteners: ISO 10642 / DIN 7991 socket countersunk screw dimensions
- fasten.it: DIN EN ISO 7046-1 and DIN 965 dimension tables
- Böllhoff: DIN 965 stainless A4 cross recess, product data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.