M5 Set Screw Dimensions
Set Screws
An M5 socket set screw takes a 2.5 mm (0.098 in) hex key in every point style. The flat and dog points are up to 3.5 mm (0.138 in) in diameter, the cup point 2.5 mm (0.098 in), and the cone point ends in a 1.25 mm (0.0492 in) flat. The long dog point is at least 2.5 mm (0.0984 in) long.
- sHex key size
- 2.5 mm0.098 in0.098 in2.5 mm
- dpFlat / dog point dia. (max)
- 3.5 mm0.138 in0.138 in3.5 mm
- dzCup point dia. (max)
- 2.5 mm0.098 in0.098 in2.5 mm
- dtCone point tip dia. (max)
- 1.25 mm0.0492 in0.0492 in1.25 mm
Drawing
M5 specifications
| dMajor diameter | 5 mm0.197 in |
|---|---|
| PPitch | 0.8 mm0.0315 in |
| sHex key size | 2.5 mm0.098 in |
| dpFlat / dog point dia. (max) | 3.5 mm0.138 in |
| dtCone point tip dia. (max) | 1.25 mm0.0492 in |
| dzCup point dia. (max) | 2.5 mm0.098 in |
| z1Dog length, short (min) | 1.25 mm0.0492 in |
| z2Dog length, long (min) | 2.5 mm0.0984 in |
M5 is the usual set screw for 8 mm and 10 mm shaft collars and GT2 pulleys with larger hubs.
Also known as
M5x0.8
Hex key for the M5
M5 in other charts
All Set Screws sizes
Sources
- ISO 4026 / 4027 / 4028 / 4029: Hexagon socket set screws with flat, cone, dog and cup point
- Westfield Fasteners: ISO 4026 (DIN 913) flat point set screw dimensions
- Westfield Fasteners: ISO 4027 (DIN 914) cone point set screw dimensions
- Westfield Fasteners: ISO 4028 (DIN 915) dog point set screw dimensions
- Westfield Fasteners: ISO 4029 (DIN 916) cup point set screw dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.