M4 Set Screw Dimensions
Set Screws
An M4 socket set screw takes a 2 mm (0.079 in) hex key in every point style. The flat and dog points are up to 2.5 mm (0.098 in) in diameter, the cup point 2 mm (0.079 in), and the cone point ends in a 1 mm (0.0394 in) flat. The long dog point is at least 2 mm (0.0787 in) long.
- sHex key size
- 2 mm0.079 in0.079 in2 mm
- dpFlat / dog point dia. (max)
- 2.5 mm0.098 in0.098 in2.5 mm
- dzCup point dia. (max)
- 2 mm0.079 in0.079 in2 mm
- dtCone point tip dia. (max)
- 1 mm0.0394 in0.0394 in1 mm
Drawing
M4 specifications
| dMajor diameter | 4 mm0.157 in |
|---|---|
| PPitch | 0.7 mm0.0276 in |
| sHex key size | 2 mm0.079 in |
| dpFlat / dog point dia. (max) | 2.5 mm0.098 in |
| dtCone point tip dia. (max) | 1 mm0.0394 in |
| dzCup point dia. (max) | 2 mm0.079 in |
| z1Dog length, short (min) | 1 mm0.0394 in |
| z2Dog length, long (min) | 2 mm0.0787 in |
Also known as
M4x0.7
Hex key for the M4
M4 in other charts
All Set Screws sizes
Sources
- ISO 4026 / 4027 / 4028 / 4029: Hexagon socket set screws with flat, cone, dog and cup point
- Westfield Fasteners: ISO 4026 (DIN 913) flat point set screw dimensions
- Westfield Fasteners: ISO 4027 (DIN 914) cone point set screw dimensions
- Westfield Fasteners: ISO 4028 (DIN 915) dog point set screw dimensions
- Westfield Fasteners: ISO 4029 (DIN 916) cup point set screw dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.