Socket Head Cap Screw Size Chart (ISO 4762 / DIN 912)

Head diameter, head height and hex key size of metric socket head cap screws to ISO 4762 (formerly DIN 912). The head height equals the thread diameter, and the key is a fixed size per thread: M6 → 5 mm, M8 → 6 mm, M10 → 8 mm.

20 sizesChecked 2026-11-153 sources
M2 – M8M2key 1.5M2.5key 2M3key 2.5M4key 3M5key 4M6key 5M8key 6M10 – M36 (smaller scale)M10key 8M12key 10M16key 14M20key 17M24key 19M30key 22M36key 27
Top views at two scales with the hex socket; the number under each head is the hex key size.Drawn to scale · Dimensions in mmDimensions in inches

Size chartTap a size for its drawing and full specs

20 of 20
SizePThread pitchmmTPIdkHead diameter (max.)mminkHead height (max.)mminsHex key sizemmin
ISO 4762 sizes
M1.60.3572.630.1181.60.0631.50.059
M20.463.53.80.15020.0791.50.059
M2.50.4556.44.50.1772.50.09820.079
M30.550.85.50.21730.1182.50.098
M40.736.370.27640.15730.118
M50.831.78.50.33550.19740.157
M6125.4100.39460.23650.197
M81.2520.3130.51280.31560.236
M101.516.9160.630100.39480.315
M121.7514.5180.709120.472100.394
M14212.7210.827140.551120.472
M16212.7240.945160.630140.551
M202.510.2301.181200.787170.669
M2438.5361.417240.945190.748
M303.57.3451.772301.181220.866
M3646.4542.126361.417271.063
DIN 912 sizes not in ISO 4762
M182.510.2271.063180.709140.551
M222.510.2331.299220.866170.669
M2738.5401.575271.063190.748
M333.57.3501.969331.299240.945

How to read a socket screw designation

A socket head cap screw is ordered as ISO 4762 – M8 × 25 – 12.9: standard, thread × length, property class. Length is measured from under the head. Steel cap screws are usually class 8.8, 10.9 or 12.9 (black oxide); stainless ones A2-70 or A4-70/80.

The head height k equals the nominal thread diameter, and the head diameter dk is about 1.5 × d for the common sizes. s is the hex socket across its flats, which is the hex key (Allen key) size. Plain heads are listed; knurled heads have the same dimensions.

To identify a screw, measure the thread diameter with a caliper, then check that the head diameter matches the chart; an imperial #10 or 1/4″ cap screw has a different head and key (5/32″, 3/16″).

About Socket Head Cap Screws

Socket head cap screws are the standard high-strength screw for machine building: the cylindrical head fits into a counterbore, needs no wrench clearance around it, and the internal hex takes high tightening torque. The dimensions here are the maximum head diameter and height from ISO 4762; actual heads are slightly smaller.

ISO 4762 replaced DIN 912 with identical head and key sizes. DIN 912 also listed M18, M22, M27 and M33, which ISO dropped; they are still made and are shown in their own group.

Other socket screw heads use smaller keys for the same thread: button head (ISO 7380) and countersunk head (ISO 10642) M8 screws take a 5 mm key instead of 6 mm, and set screws use smaller keys again. The hex key chart lists every combination.

Counterbores

Counterbore diameters and depths are not part of ISO 4762; take them from DIN 974-1, Machinery's Handbook or the screw maker's table. The counterbore must clear dk plus the hole position tolerance, and be at least k deep so the head sits flush or below. The through hole is normally the ISO 273 medium clearance (M8 → 9 mm).

Questions

What size Allen key for an M6 socket head screw?

5 mm for a standard M6 socket head cap screw (ISO 4762 / DIN 912). M6 button head and countersunk screws take 4 mm, an M6 set screw 3 mm.

What Allen key fits an M8 bolt?

6 mm for an M8 socket head cap screw; 5 mm for M8 button head or countersunk screws; 4 mm for an M8 set screw.

What are the head dimensions of an M5 cap screw?

8.5 mm head diameter, 5 mm head height and a 4 mm hex socket.

Is DIN 912 the same as ISO 4762?

For head, key and thread dimensions, yes. ISO 4762 replaced DIN 912 and dropped the sizes M18, M22, M27 and M33, and it covers some details such as thread lengths slightly differently.

Why is the head height equal to the thread diameter?

It gives the hex socket enough depth to transmit the screw's full tightening torque; a 12.9 screw needs a deep socket. Low-head versions (DIN 7984, DIN 6912) exist for tight spaces, with lower torque capacity.

Sources

  1. ISO 4762:2004, Hexagon socket head cap screws
  2. DIN 912 (withdrawn): Hexagon socket head cap screws, as reproduced in Westfield Fasteners and FastenRight data tables
  3. Farnell / Unbrako: ISO 4762 socket head cap screw dimension sheet

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.