32216 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 322 series (light, wide)
The 32216 is a tapered roller bearing (322 series, light, wide): 80 mm (3.1496 in) bore, 140 mm (5.5118 in) outside diameter and 35.25 mm (1.3878 in) total width. The cone is 33 mm (1.2992 in) wide and the cup 28 mm (1.1024 in).
- dBore diameter
- 80 mm3.1496 in3.1496 in80 mm
- DOutside diameter
- 140 mm5.5118 in5.5118 in140 mm
- TTotal width
- 35.25 mm1.3878 in1.3878 in35.25 mm
Drawing
32216 specifications
| dBore diameter | 80 mm3.1496 in |
|---|---|
| DOutside diameter | 140 mm5.5118 in |
| TTotal width | 35.25 mm1.3878 in |
| BCone width | 33 mm1.2992 in |
| CCup width | 28 mm1.1024 in |
Also known as
32216J2/QHR32216J4T-3221632216-A32216-XL32216JR32216U
Other tapered roller bearings with a 80 mm bore
Same 80 mm bore in other bearing types
6016Ball Bearings6216Ball Bearings6316Ball Bearings7016Angular Contact Bearings7216Angular Contact Bearings7316Angular Contact BearingsNU216Cylindrical Roller BearingsNU316Cylindrical Roller BearingsNU2216Cylindrical Roller Bearings22316Spherical Roller Bearings21316Spherical Roller Bearings22216Spherical Roller Bearings1216Self-Aligning Ball Bearings1316Self-Aligning Ball Bearings2216Self-Aligning Ball Bearings51116Thrust Ball Bearings51216Thrust Ball Bearings51316Thrust Ball BearingsNA4916Needle Roller BearingsUC216Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.