32009 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32009 X is a tapered roller bearing (320 X series, extra light, wide): 45 mm (1.7717 in) bore, 75 mm (2.9528 in) outside diameter and 20 mm (0.7874 in) total width. The cone is 20 mm (0.7874 in) wide and the cup 15.5 mm (0.6102 in).
- dBore diameter
- 45 mm1.7717 in1.7717 in45 mm
- DOutside diameter
- 75 mm2.9528 in2.9528 in75 mm
- TTotal width
- 20 mm0.7874 in0.7874 in20 mm
Drawing
32009 X specifications
| dBore diameter | 45 mm1.7717 in |
|---|---|
| DOutside diameter | 75 mm2.9528 in |
| TTotal width | 20 mm0.7874 in |
| BCone width | 20 mm0.7874 in |
| CCup width | 15.5 mm0.6102 in |
Also known as
HR32009XJ4T-32009X32009-X-XL32009JR32009J2/QHR32009J4T-3200932009-A32009-XL32009U
Other tapered roller bearings with a 45 mm bore
Same 45 mm bore in other bearing types
6009Ball Bearings6209Ball Bearings6309Ball Bearings7009Angular Contact Bearings7209Angular Contact Bearings7309Angular Contact BearingsNU209Cylindrical Roller BearingsNU309Cylindrical Roller BearingsNU2209Cylindrical Roller Bearings21309Spherical Roller Bearings22209Spherical Roller Bearings22309Spherical Roller Bearings1209Self-Aligning Ball Bearings1309Self-Aligning Ball Bearings2209Self-Aligning Ball Bearings51109Thrust Ball Bearings51209Thrust Ball Bearings51309Thrust Ball BearingsNA4909Needle Roller BearingsUC209Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.