32208 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 322 series (light, wide)
The 32208 is a tapered roller bearing (322 series, light, wide): 40 mm (1.5748 in) bore, 80 mm (3.1496 in) outside diameter and 24.75 mm (0.9744 in) total width. The cone is 23 mm (0.9055 in) wide and the cup 19 mm (0.7480 in).
- dBore diameter
- 40 mm1.5748 in1.5748 in40 mm
- DOutside diameter
- 80 mm3.1496 in3.1496 in80 mm
- TTotal width
- 24.75 mm0.9744 in0.9744 in24.75 mm
Drawing
32208 specifications
| dBore diameter | 40 mm1.5748 in |
|---|---|
| DOutside diameter | 80 mm3.1496 in |
| TTotal width | 24.75 mm0.9744 in |
| BCone width | 23 mm0.9055 in |
| CCup width | 19 mm0.7480 in |
Also known as
32208J2/QHR32208J4T-3220832208-A32208-XL32208JR32208U
Other tapered roller bearings with a 40 mm bore
Same 40 mm bore in other bearing types
6008Ball Bearings6208Ball Bearings6308Ball Bearings7208Angular Contact Bearings7308Angular Contact Bearings7008Angular Contact BearingsNU208Cylindrical Roller BearingsNU308Cylindrical Roller BearingsNU2208Cylindrical Roller Bearings22208Spherical Roller Bearings21308Spherical Roller Bearings22308Spherical Roller Bearings1208Self-Aligning Ball Bearings2208Self-Aligning Ball Bearings1308Self-Aligning Ball Bearings51108Thrust Ball Bearings51208Thrust Ball Bearings51308Thrust Ball BearingsNA4908Needle Roller BearingsUC208Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.