32209 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 322 series (light, wide)
The 32209 is a tapered roller bearing (322 series, light, wide): 45 mm (1.7717 in) bore, 85 mm (3.3465 in) outside diameter and 24.75 mm (0.9744 in) total width. The cone is 23 mm (0.9055 in) wide and the cup 19 mm (0.7480 in).
- dBore diameter
- 45 mm1.7717 in1.7717 in45 mm
- DOutside diameter
- 85 mm3.3465 in3.3465 in85 mm
- TTotal width
- 24.75 mm0.9744 in0.9744 in24.75 mm
Drawing
32209 specifications
| dBore diameter | 45 mm1.7717 in |
|---|---|
| DOutside diameter | 85 mm3.3465 in |
| TTotal width | 24.75 mm0.9744 in |
| BCone width | 23 mm0.9055 in |
| CCup width | 19 mm0.7480 in |
Also known as
32209J2/QHR32209J4T-3220932209-A32209-XL32209JR32209U
Other tapered roller bearings with a 45 mm bore
Same 45 mm bore in other bearing types
6009Ball Bearings6209Ball Bearings6309Ball Bearings7009Angular Contact Bearings7209Angular Contact Bearings7309Angular Contact BearingsNU209Cylindrical Roller BearingsNU309Cylindrical Roller BearingsNU2209Cylindrical Roller Bearings21309Spherical Roller Bearings22209Spherical Roller Bearings22309Spherical Roller Bearings1209Self-Aligning Ball Bearings1309Self-Aligning Ball Bearings2209Self-Aligning Ball Bearings51109Thrust Ball Bearings51209Thrust Ball Bearings51309Thrust Ball BearingsNA4909Needle Roller BearingsUC209Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.