32011 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32011 X is a tapered roller bearing (320 X series, extra light, wide): 55 mm (2.1654 in) bore, 90 mm (3.5433 in) outside diameter and 23 mm (0.9055 in) total width. The cone is 23 mm (0.9055 in) wide and the cup 17.5 mm (0.6890 in).
- dBore diameter
- 55 mm2.1654 in2.1654 in55 mm
- DOutside diameter
- 90 mm3.5433 in3.5433 in90 mm
- TTotal width
- 23 mm0.9055 in0.9055 in23 mm
Drawing
32011 X specifications
| dBore diameter | 55 mm2.1654 in |
|---|---|
| DOutside diameter | 90 mm3.5433 in |
| TTotal width | 23 mm0.9055 in |
| BCone width | 23 mm0.9055 in |
| CCup width | 17.5 mm0.6890 in |
Also known as
HR32011XJ4T-32011X32011-X-XL32011JR32011J2/QHR32011J4T-3201132011-A32011-XL32011U
Other tapered roller bearings with a 55 mm bore
Same 55 mm bore in other bearing types
6011Ball Bearings6211Ball Bearings6311Ball Bearings7011Angular Contact Bearings7211Angular Contact Bearings7311Angular Contact BearingsNU211Cylindrical Roller BearingsNU311Cylindrical Roller BearingsNU2211Cylindrical Roller Bearings21311Spherical Roller Bearings22211Spherical Roller Bearings22311Spherical Roller Bearings1211Self-Aligning Ball Bearings1311Self-Aligning Ball Bearings2211Self-Aligning Ball Bearings51111Thrust Ball Bearings51211Thrust Ball Bearings51311Thrust Ball BearingsNA4911Needle Roller BearingsUC211Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.