M2 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M2 wire thread insert, drill 2.1 mm (0.0827 in), typical and tap with an M2 STI tap, pitch 0.4 mm (0.0157 in). Standard insert lengths are 2 mm (0.079 in), 3 mm (0.118 in), 4 mm (0.157 in), 5 mm (0.197 in) and 6 mm (0.236 in).

⌀Tap drill for STI tap (typical)
2.1 mm0.0827 in0.0827 in2.1 mm
PPitch
0.4 mm0.0157 in0.0157 in0.4 mm
1.5dInsert length 1.5d
3 mm0.118 in0.118 in3 mm
2dInsert length 2d
4 mm0.157 in0.157 in4 mm

Drawing

⌀2.1 mm⌀0.0827 in1.5d 3 mm1.5d 0.118 inTakes a standard M2 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M2 specifications

PPitch0.4 mm0.0157 in
⌀Tap drill for STI tap (typical)2.1 mm0.0827 in
1dInsert length 1d2 mm0.079 in
1.5dInsert length 1.5d3 mm0.118 in
2dInsert length 2d4 mm0.157 in
2.5dInsert length 2.5d5 mm0.197 in
3dInsert length 3d6 mm0.236 in

M2 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.