M2.5 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M2.5 wire thread insert, drill 2.6 mm (0.1024 in), typical and tap with an M2.5 STI tap, pitch 0.45 mm (0.0177 in). Standard insert lengths are 2.5 mm (0.098 in), 3.8 mm (0.148 in), 5 mm (0.197 in), 6.3 mm (0.246 in) and 7.5 mm (0.295 in).

⌀Tap drill for STI tap (typical)
2.6 mm0.1024 in0.1024 in2.6 mm
PPitch
0.45 mm0.0177 in0.0177 in0.45 mm
1.5dInsert length 1.5d
3.8 mm0.148 in0.148 in3.8 mm
2dInsert length 2d
5 mm0.197 in0.197 in5 mm

Drawing

⌀2.6 mm⌀0.1024 in1.5d 3.8 mm1.5d 0.148 inTakes a standard M2.5 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M2.5 specifications

PPitch0.45 mm0.0177 in
⌀Tap drill for STI tap (typical)2.6 mm0.1024 in
1dInsert length 1d2.5 mm0.098 in
1.5dInsert length 1.5d3.8 mm0.148 in
2dInsert length 2d5 mm0.197 in
2.5dInsert length 2.5d6.3 mm0.246 in
3dInsert length 3d7.5 mm0.295 in

M2.5 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.