M24 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M24 wire thread insert, drill 25 mm (0.9843 in), typical and tap with an M24 STI tap, pitch 3 mm (0.1181 in). Standard insert lengths are 24 mm (0.945 in), 36 mm (1.417 in), 48 mm (1.890 in), 60 mm (2.362 in) and 72 mm (2.835 in).

⌀Tap drill for STI tap (typical)
25 mm0.9843 in0.9843 in25 mm
PPitch
3 mm0.1181 in0.1181 in3 mm
1.5dInsert length 1.5d
36 mm1.417 in1.417 in36 mm
2dInsert length 2d
48 mm1.890 in1.890 in48 mm

Drawing

⌀25 mm⌀0.9843 in1.5d 36 mm1.5d 1.417 inTakes a standard M24 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M24 specifications

PPitch3 mm0.1181 in
⌀Tap drill for STI tap (typical)25 mm0.9843 in
1dInsert length 1d24 mm0.945 in
1.5dInsert length 1.5d36 mm1.417 in
2dInsert length 2d48 mm1.890 in
2.5dInsert length 2.5d60 mm2.362 in
3dInsert length 3d72 mm2.835 in

M24 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.