M20 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M20 wire thread insert, drill 20.75 mm (0.8169 in), typical and tap with an M20 STI tap, pitch 2.5 mm (0.0984 in). Standard insert lengths are 20 mm (0.787 in), 30 mm (1.181 in), 40 mm (1.575 in), 50 mm (1.969 in) and 60 mm (2.362 in).

⌀Tap drill for STI tap (typical)
20.75 mm0.8169 in0.8169 in20.75 mm
PPitch
2.5 mm0.0984 in0.0984 in2.5 mm
1.5dInsert length 1.5d
30 mm1.181 in1.181 in30 mm
2dInsert length 2d
40 mm1.575 in1.575 in40 mm

Drawing

⌀20.75 mm⌀0.8169 in1.5d 30 mm1.5d 1.181 inTakes a standard M20 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M20 specifications

PPitch2.5 mm0.0984 in
⌀Tap drill for STI tap (typical)20.75 mm0.8169 in
1dInsert length 1d20 mm0.787 in
1.5dInsert length 1.5d30 mm1.181 in
2dInsert length 2d40 mm1.575 in
2.5dInsert length 2.5d50 mm1.969 in
3dInsert length 3d60 mm2.362 in

M20 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.