GT2 3 mm Timing Belt Profile Dimensions

Timing Belts · Gates PowerGrip GT2 / GT3

GT2 3 mm timing belts (Gates PowerGrip GT2 / GT3) have a 3 mm (0.118 in) pitch, a tooth height of 1.12 mm (0.044 in) and an overall belt height of about 2.41 mm (0.095 in). Common widths: 6, 9, 15 mm. A pulley with z teeth has a pitch diameter of z × 3 mm / π.

pPitch
3 mm0.118 in0.118 in3 mm
hₜTooth height
1.12 mm0.044 in0.044 in1.12 mm
hₛBelt height (typical)
2.41 mm0.095 in0.095 in2.41 mm

Drawing

pitch linep = 3 mmp = 0.118 in2.41 mm0.095 in1.12 mm0.044 in
Two pitches, teeth down. Pitch and heights to scale; the curved tooth outline is simplified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

GT2 3 mm specifications

pPitch3 mm0.118 in
hₜTooth height1.12 mm0.044 in
hₛBelt height (typical)2.41 mm0.095 in
uPitch line differential (PLD)0.381 mm0.015 in
Tooth profileModified curvilinear
Common widths6, 9, 15 mm

Gates 3MGT values. GT3 belts are the current Gates construction and use the same pulleys.

Also known as

3GT3MGT

Other profiles with the same pitch (not interchangeable)

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.