HTD 3M Timing Belt Profile Dimensions

Timing Belts · Curvilinear HTD (ISO 13050)

HTD 3M timing belts (Curvilinear HTD, ISO 13050) have a 3 mm (0.118 in) pitch, a tooth height of 1.2 mm (0.047 in) and an overall belt height of about 2.4 mm (0.094 in). Common widths: 6, 9, 15 mm. A pulley with z teeth has a pitch diameter of z × 3 mm / π.

pPitch
3 mm0.118 in0.118 in3 mm
hₜTooth height
1.2 mm0.047 in0.047 in1.2 mm
hₛBelt height (typical)
2.4 mm0.094 in0.094 in2.4 mm

Drawing

pitch linep = 3 mmp = 0.118 in2.4 mm0.094 in1.2 mm0.047 in
Two pitches, teeth down. Pitch and heights to scale; the curved tooth outline is simplified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

HTD 3M specifications

pPitch3 mm0.118 in
hₜTooth height1.2 mm0.047 in
hₛBelt height (typical)2.4 mm0.094 in
uPitch line differential (PLD)0.381 mm0.015 in
Tooth profileCurvilinear (round)
Common widths6, 9, 15 mm

Tooth height is given as 1.1–1.2 mm depending on the source; overall height is 2.4 mm.

Also known as

3M

Other profiles with the same pitch (not interchangeable)

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.