H Timing Belt Profile Dimensions
Timing Belts · Trapezoidal, inch (ISO 5296)
H timing belts (Trapezoidal, inch, ISO 5296) have a 12.7 mm (0.500 in) pitch, a tooth height of 2.29 mm (0.090 in) and an overall belt height of about 4.3 mm (0.169 in). Common widths: 19.1, 25.4, 38.1, 50.8, 76.2 (3/4"–3"). A pulley with z teeth has a pitch diameter of z × 12.7 mm / π.
- pPitch
- 12.7 mm0.500 in0.500 in12.7 mm
- hₜTooth height
- 2.29 mm0.090 in0.090 in2.29 mm
- hₛBelt height (typical)
- 4.3 mm0.169 in0.169 in4.3 mm
Drawing
H specifications
| pPitch | 12.7 mm0.500 in |
|---|---|
| hₜTooth height | 2.29 mm0.090 in |
| hₛBelt height (typical) | 4.3 mm0.169 in |
| sTooth width at root | 6.12 mm0.241 in |
| 2βTooth flank angle | 40° |
| uPitch line differential (PLD) | 0.686 mm0.027 in |
| Tooth profile | Trapezoidal |
| Common widths | 19.1, 25.4, 38.1, 50.8, 76.2 (3/4"–3") |
All timing belt profiles
Sources
- ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
- ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
- Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
- Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
- Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
- Pfeifer Industries: Timing belt tooth profiles and pitches
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.