L Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, inch (ISO 5296)

L timing belts (Trapezoidal, inch, ISO 5296) have a 9.525 mm (0.375 in) pitch, a tooth height of 1.91 mm (0.075 in) and an overall belt height of about 3.6 mm (0.142 in). Common widths: 12.7, 19.1, 25.4 (1/2", 3/4", 1"). A pulley with z teeth has a pitch diameter of z × 9.525 mm / π.

pPitch
9.525 mm0.375 in0.375 in9.525 mm
hₜTooth height
1.91 mm0.075 in0.075 in1.91 mm
hₛBelt height (typical)
3.6 mm0.142 in0.142 in3.6 mm

Drawing

pitch linep = 9.525 mmp = 0.375 in3.6 mm0.142 in1.91 mm0.075 in2β = 40°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

L specifications

pPitch9.525 mm0.375 in
hₜTooth height1.91 mm0.075 in
hₛBelt height (typical)3.6 mm0.142 in
sTooth width at root4.65 mm0.183 in
2βTooth flank angle40°
uPitch line differential (PLD)0.381 mm0.015 in
Tooth profileTrapezoidal
Common widths12.7, 19.1, 25.4 (1/2", 3/4", 1")

L is 3/8" (9.525 mm) pitch. Belt codes give the pitch length in tenths of an inch: 210L050 is 21.0" long (56 teeth) and 1/2" wide.

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.