HTD 5M Timing Belt Profile Dimensions
Timing Belts · Curvilinear HTD (ISO 13050)
HTD 5M timing belts (Curvilinear HTD, ISO 13050) have a 5 mm (0.197 in) pitch, a tooth height of 2.1 mm (0.083 in) and an overall belt height of about 3.8 mm (0.150 in). Common widths: 9, 15, 25 mm. A pulley with z teeth has a pitch diameter of z × 5 mm / π.
- pPitch
- 5 mm0.197 in0.197 in5 mm
- hₜTooth height
- 2.1 mm0.083 in0.083 in2.1 mm
- hₛBelt height (typical)
- 3.8 mm0.150 in0.150 in3.8 mm
Drawing
HTD 5M specifications
| pPitch | 5 mm0.197 in |
|---|---|
| hₜTooth height | 2.1 mm0.083 in |
| hₛBelt height (typical) | 3.8 mm0.150 in |
| uPitch line differential (PLD) | 0.5715 mm0.023 in |
| Tooth profile | Curvilinear (round) |
| Common widths | 9, 15, 25 mm |
Also known as
5M
Other profiles with the same pitch (not interchangeable)
All timing belt profiles
Sources
- ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
- ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
- Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
- Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
- Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
- Pfeifer Industries: Timing belt tooth profiles and pitches
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.