S8M Timing Belt Profile Dimensions

Timing Belts · STD / Super Torque (S..M)

S8M timing belts (STD / Super Torque, S..M) have a 8 mm (0.315 in) pitch, a tooth height of 3.05 mm (0.120 in) and an overall belt height of about 5.3 mm (0.209 in). Common widths: 15, 25, 40, 60 mm. A pulley with z teeth has a pitch diameter of z × 8 mm / π.

pPitch
8 mm0.315 in0.315 in8 mm
hₜTooth height
3.05 mm0.120 in0.120 in3.05 mm
hₛBelt height (typical)
5.3 mm0.209 in0.209 in5.3 mm

Drawing

p = 8 mmp = 0.315 in5.3 mm0.209 in3.05 mm0.120 in
Two pitches, teeth down. Pitch and heights to scale; the curved tooth outline is simplified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

S8M specifications

pPitch8 mm0.315 in
hₜTooth height3.05 mm0.120 in
hₛBelt height (typical)5.3 mm0.209 in
Tooth profileCurvilinear, flat tip
Common widths15, 25, 40, 60 mm

Other profiles with the same pitch (not interchangeable)

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.