S5M Timing Belt Profile Dimensions

Timing Belts · STD / Super Torque (S..M)

S5M timing belts (STD / Super Torque, S..M) have a 5 mm (0.197 in) pitch, a tooth height of 1.91 mm (0.075 in) and an overall belt height of about 3.4 mm (0.134 in). Common widths: 10, 15, 25 mm. A pulley with z teeth has a pitch diameter of z × 5 mm / π.

pPitch
5 mm0.197 in0.197 in5 mm
hₜTooth height
1.91 mm0.075 in0.075 in1.91 mm
hₛBelt height (typical)
3.4 mm0.134 in0.134 in3.4 mm

Drawing

p = 5 mmp = 0.197 in3.4 mm0.134 in1.91 mm0.075 in
Two pitches, teeth down. Pitch and heights to scale; the curved tooth outline is simplified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

S5M specifications

pPitch5 mm0.197 in
hₜTooth height1.91 mm0.075 in
hₛBelt height (typical)3.4 mm0.134 in
Tooth profileCurvilinear, flat tip
Common widths10, 15, 25 mm

Other profiles with the same pitch (not interchangeable)

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.