#0 Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The #0 unified thread has a major diameter of 0.0600 in (1.52 mm). Fine thread (UNF): 80 TPI (0.318 mm), tap drill 3/64″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 1.52 mm0.0600 in0.0600 in1.52 mm
- UNF threads per inch
- 0.318 mm80 TPI80 TPI0.318 mm
Drawing
#0 specifications
| dMajor diameter | 0.0600 in1.52 mm |
|---|---|
| UNF threads per inch | 80 TPI0.318 mm |
| UNF tap drill | 3/64″ |
| UNF tap drill (decimal) | 0.0469 in1.19 mm |
| Clearance drill, close fit | #52 |
| Clearance drill, close (decimal) | 0.0635 in1.61 mm |
| Clearance drill, free fit | #50 |
| Clearance drill, free (decimal) | 0.0700 in1.78 mm |
| d₂Pitch diameter (basic) | 0.0519 in1.318 mm |
| D₁Minor diameter, nut (basic) | 0.0465 in1.181 mm |
#0 has no coarse (UNC) thread; #0-80 UNF is the only standard thread. It is used on small optics, instruments and model hardware.
Also known as
#0-80#0"-80
Tap and clearance drills for #0
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.