#2 Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The #2 unified thread has a major diameter of 0.0860 in (2.18 mm). Coarse thread (UNC): 56 TPI (0.454 mm), tap drill #50. Fine thread (UNF): 64 TPI (0.397 mm), tap drill #50. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 2.18 mm0.0860 in0.0860 in2.18 mm
- UNC threads per inch
- 0.454 mm56 TPI56 TPI0.454 mm
- UNC tap drill
- #50
- UNF threads per inch
- 0.397 mm64 TPI64 TPI0.397 mm
Drawing
#2 specifications
| dMajor diameter | 0.0860 in2.18 mm |
|---|---|
| UNC threads per inch | 56 TPI0.454 mm |
| UNC tap drill | #50 |
| UNC tap drill (decimal) | 0.0700 in1.78 mm |
| UNF threads per inch | 64 TPI0.397 mm |
| UNF tap drill | #50 |
| UNF tap drill (decimal) | 0.0700 in1.78 mm |
| Clearance drill, close fit | #43 |
| Clearance drill, close (decimal) | 0.0890 in2.26 mm |
| Clearance drill, free fit | #41 |
| Clearance drill, free (decimal) | 0.0960 in2.44 mm |
| d₂Pitch diameter (basic) | 0.0744 in1.890 mm |
| D₁Minor diameter, nut (basic) | 0.0667 in1.694 mm |
#2-56 is common on small electronics, model aircraft linkages and instrument hardware.
Also known as
#2-56#2"-56#2-64#2"-64
Tap and clearance drills for #2
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.