#4 Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The #4 unified thread has a major diameter of 0.1120 in (2.84 mm). Coarse thread (UNC): 40 TPI (0.635 mm), tap drill #43. Fine thread (UNF): 48 TPI (0.529 mm), tap drill #42. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 2.84 mm0.1120 in0.1120 in2.84 mm
- UNC threads per inch
- 0.635 mm40 TPI40 TPI0.635 mm
- UNC tap drill
- #43
- UNF threads per inch
- 0.529 mm48 TPI48 TPI0.529 mm
Drawing
#4 specifications
| dMajor diameter | 0.1120 in2.84 mm |
|---|---|
| UNC threads per inch | 40 TPI0.635 mm |
| UNC tap drill | #43 |
| UNC tap drill (decimal) | 0.0890 in2.26 mm |
| UNF threads per inch | 48 TPI0.529 mm |
| UNF tap drill | #42 |
| UNF tap drill (decimal) | 0.0935 in2.37 mm |
| Clearance drill, close fit | #32 |
| Clearance drill, close (decimal) | 0.1160 in2.95 mm |
| Clearance drill, free fit | #30 |
| Clearance drill, free (decimal) | 0.1285 in3.26 mm |
| d₂Pitch diameter (basic) | 0.0958 in2.433 mm |
| D₁Minor diameter, nut (basic) | 0.0849 in2.156 mm |
#4-40 UNC is the jackscrew thread of D-sub (VGA, serial) connectors and a common PCB standoff thread in the US.
Also known as
#4-40#4"-40#4-48#4"-48
Tap and clearance drills for #4
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.