W10×12 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×12 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 9.87 in (250.7 mm) deep with a 3.96 in (100.6 mm) flange, a 0.19 in (4.8 mm) web and a 0.21 in (5.3 mm) flange, and weighs 12 lb/ft (17.9 kg/m). Area 3.54 in² (2,284 mm²); strong-axis Ix = 53.8 in⁴ (2,239.3 cm⁴), Sx = 10.9 in³ (178.6 cm³), Zx = 12.6 in³ (206.5 cm³).

dDepth
250.7 mm9.87 in9.87 in250.7 mm
bfFlange width
100.6 mm3.96 in3.96 in100.6 mm
twWeb thickness
4.8 mm0.19 in0.19 in4.8 mm
tfFlange thickness
5.3 mm0.21 in0.21 in5.3 mm

Drawing

100.6 mm3.96 in250.7 mm9.87 intf 5.3 mmtf 0.21 intw 4.8 mmtw 0.19 ink 13.0 mmk 0.51 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×12 specifications

dDepth9.87 in250.7 mm
bfFlange width3.96 in100.6 mm
twWeb thickness0.19 in4.8 mm
tfFlange thickness0.21 in5.3 mm
kDesign value0.51 in13.0 mm
kDetailing value3/4 in19.0 mm
k1Detailing value9/16 in14.3 mm
WWeight12 lb/ft17.9 kg/m
AArea3.54 in²2,284 mm²
IxMoment of inertia, strong axis53.8 in⁴2,239.3 cm⁴
ZxPlastic modulus, strong axis12.6 in³206.5 cm³
SxSection modulus, strong axis10.9 in³178.6 cm³
rxRadius of gyration, strong axis3.9 in99.1 mm
IyMoment of inertia, weak axis2.18 in⁴90.7 cm⁴
ZyPlastic modulus, weak axis1.74 in³28.5 cm³
SySection modulus, weak axis1.1 in³18 cm³
ryRadius of gyration, weak axis0.79 in19.9 mm
JTorsional constant0.055 in⁴2.28 cm⁴
bf/2tfFlange slenderness9.43
h/twWeb slenderness46.6
Metric designationW250×17.9

Also known as

W250×17.9

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.