W8×13 Beam Dimensions & Properties

W Shapes (AISC) · W8: 8 in nominal depth

W8×13 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 7.99 in (202.9 mm) deep with a 4 in (101.6 mm) flange, a 0.23 in (5.8 mm) web and a 0.255 in (6.5 mm) flange, and weighs 13 lb/ft (19.3 kg/m). Area 3.84 in² (2,477 mm²); strong-axis Ix = 39.6 in⁴ (1,648.3 cm⁴), Sx = 9.91 in³ (162.4 cm³), Zx = 11.4 in³ (186.8 cm³).

dDepth
202.9 mm7.99 in7.99 in202.9 mm
bfFlange width
101.6 mm4 in4 in101.6 mm
twWeb thickness
5.8 mm0.23 in0.23 in5.8 mm
tfFlange thickness
6.5 mm0.255 in0.255 in6.5 mm

Drawing

101.6 mm4 in202.9 mm7.99 intf 6.5 mmtf 0.255 intw 5.8 mmtw 0.23 ink 14.1 mmk 0.555 in
Drawn to scale · Dimensions in mmDimensions in inches

W8×13 specifications

dDepth7.99 in202.9 mm
bfFlange width4 in101.6 mm
twWeb thickness0.23 in5.8 mm
tfFlange thickness0.255 in6.5 mm
kDesign value0.555 in14.1 mm
kDetailing value3/4 in19.0 mm
k1Detailing value9/16 in14.3 mm
WWeight13 lb/ft19.3 kg/m
AArea3.84 in²2,477 mm²
IxMoment of inertia, strong axis39.6 in⁴1,648.3 cm⁴
ZxPlastic modulus, strong axis11.4 in³186.8 cm³
SxSection modulus, strong axis9.91 in³162.4 cm³
rxRadius of gyration, strong axis3.21 in81.5 mm
IyMoment of inertia, weak axis2.73 in⁴113.6 cm⁴
ZyPlastic modulus, weak axis2.15 in³35.2 cm³
SySection modulus, weak axis1.37 in³22.5 cm³
ryRadius of gyration, weak axis0.84 in21.4 mm
JTorsional constant0.087 in⁴3.63 cm⁴
bf/2tfFlange slenderness7.84
h/twWeb slenderness29.9
Metric designationW200×19.3

Also known as

W200×19.3

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.