W4×13 Beam Dimensions & Properties

W Shapes (AISC) · W4: 4 in nominal depth

W4×13 is an AISC wide-flange shape (W4: 4 in nominal depth). It is 4.16 in (105.7 mm) deep with a 4.06 in (103.1 mm) flange, a 0.28 in (7.1 mm) web and a 0.345 in (8.8 mm) flange, and weighs 13 lb/ft (19.3 kg/m). Area 3.83 in² (2,471 mm²); strong-axis Ix = 11.3 in⁴ (470.3 cm⁴), Sx = 5.46 in³ (89.5 cm³), Zx = 6.28 in³ (102.9 cm³).

dDepth
105.7 mm4.16 in4.16 in105.7 mm
bfFlange width
103.1 mm4.06 in4.06 in103.1 mm
twWeb thickness
7.1 mm0.28 in0.28 in7.1 mm
tfFlange thickness
8.8 mm0.345 in0.345 in8.8 mm

Drawing

103.1 mm4.06 in105.7 mm4.16 intf 8.8 mmtf 0.345 intw 7.1 mmtw 0.28 ink 15.1 mmk 0.595 in
Drawn to scale · Dimensions in mmDimensions in inches

W4×13 specifications

dDepth4.16 in105.7 mm
bfFlange width4.06 in103.1 mm
twWeb thickness0.28 in7.1 mm
tfFlange thickness0.345 in8.8 mm
kDesign value0.595 in15.1 mm
kDetailing value3/4 in19.0 mm
k1Detailing value1/2 in12.7 mm
WWeight13 lb/ft19.3 kg/m
AArea3.83 in²2,471 mm²
IxMoment of inertia, strong axis11.3 in⁴470.3 cm⁴
ZxPlastic modulus, strong axis6.28 in³102.9 cm³
SxSection modulus, strong axis5.46 in³89.5 cm³
rxRadius of gyration, strong axis1.72 in43.7 mm
IyMoment of inertia, weak axis3.86 in⁴160.7 cm⁴
ZyPlastic modulus, weak axis2.92 in³47.9 cm³
SySection modulus, weak axis1.9 in³31.1 cm³
ryRadius of gyration, weak axis1 in25.4 mm
JTorsional constant0.151 in⁴6.29 cm⁴
bf/2tfFlange slenderness5.88
h/twWeb slenderness10.6
Metric designationW100×19.3

Also known as

W100×19.3

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.