W14×426 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×426 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 18.7 in (475.0 mm) deep with a 16.7 in (424.2 mm) flange, a 1.88 in (47.8 mm) web and a 3.04 in (77.2 mm) flange, and weighs 426 lb/ft (634.0 kg/m). Area 125 in² (80,645 mm²); strong-axis Ix = 6,600 in⁴ (274,712.7 cm⁴), Sx = 706 in³ (11,569.3 cm³), Zx = 869 in³ (14,240.4 cm³).

dDepth
475.0 mm18.7 in18.7 in475.0 mm
bfFlange width
424.2 mm16.7 in16.7 in424.2 mm
twWeb thickness
47.8 mm1.88 in1.88 in47.8 mm
tfFlange thickness
77.2 mm3.04 in3.04 in77.2 mm

Drawing

424.2 mm16.7 in475.0 mm18.7 intf 77.2 mmtf 3.04 intw 47.8 mmtw 1.88 ink 92.2 mmk 3.63 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×426 specifications

dDepth18.7 in475.0 mm
bfFlange width16.7 in424.2 mm
twWeb thickness1.88 in47.8 mm
tfFlange thickness3.04 in77.2 mm
kDesign value3.63 in92.2 mm
kDetailing value4 5/16 in109.5 mm
k1Detailing value2 1/8 in54.0 mm
WWeight426 lb/ft634.0 kg/m
AArea125 in²80,645 mm²
IxMoment of inertia, strong axis6,600 in⁴274,712.7 cm⁴
ZxPlastic modulus, strong axis869 in³14,240.4 cm³
SxSection modulus, strong axis706 in³11,569.3 cm³
rxRadius of gyration, strong axis7.26 in184.4 mm
IyMoment of inertia, weak axis2,360 in⁴98,230.6 cm⁴
ZyPlastic modulus, weak axis434 in³7,112 cm³
SySection modulus, weak axis283 in³4,637.5 cm³
ryRadius of gyration, weak axis4.34 in110.2 mm
JTorsional constant331 in⁴13,777.26 cm⁴
bf/2tfFlange slenderness2.75
h/twWeb slenderness6.1
Metric designationW360×634

Also known as

W360×634

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.