W40×431 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×431 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 41.3 in (1049.0 mm) deep with a 16.2 in (411.5 mm) flange, a 1.34 in (34.0 mm) web and a 2.36 in (59.9 mm) flange, and weighs 431 lb/ft (641.4 kg/m). Area 127 in² (81,935 mm²); strong-axis Ix = 34,800 in⁴ (1,448,485.4 cm⁴), Sx = 1,690 in³ (27,694.1 cm³), Zx = 1,960 in³ (32,118.6 cm³).
- dDepth
- 1049.0 mm41.3 in41.3 in1049.0 mm
- bfFlange width
- 411.5 mm16.2 in16.2 in411.5 mm
- twWeb thickness
- 34.0 mm1.34 in1.34 in34.0 mm
- tfFlange thickness
- 59.9 mm2.36 in2.36 in59.9 mm
Drawing
W40×431 specifications
| dDepth | 41.3 in1049.0 mm |
|---|---|
| bfFlange width | 16.2 in411.5 mm |
| twWeb thickness | 1.34 in34.0 mm |
| tfFlange thickness | 2.36 in59.9 mm |
| kDesign value | 3.54 in89.9 mm |
| kDetailing value | 3 5/8 in92.1 mm |
| k1Detailing value | 1 7/8 in47.6 mm |
| WWeight | 431 lb/ft641.4 kg/m |
| AArea | 127 in²81,935 mm² |
| IxMoment of inertia, strong axis | 34,800 in⁴1,448,485.4 cm⁴ |
| ZxPlastic modulus, strong axis | 1,960 in³32,118.6 cm³ |
| SxSection modulus, strong axis | 1,690 in³27,694.1 cm³ |
| rxRadius of gyration, strong axis | 16.6 in421.6 mm |
| IyMoment of inertia, weak axis | 1,690 in⁴70,343.1 cm⁴ |
| ZyPlastic modulus, weak axis | 328 in³5,375 cm³ |
| SySection modulus, weak axis | 208 in³3,408.5 cm³ |
| ryRadius of gyration, weak axis | 3.65 in92.7 mm |
| JTorsional constant | 177 in⁴7,367.3 cm⁴ |
| bf/2tfFlange slenderness | 3.44 |
| h/twWeb slenderness | 25.5 |
| Metric designation | W1000×642 |
Also known as
W1000×642
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.