W36×441 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×441 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 38.9 in (988.1 mm) deep with a 17 in (431.8 mm) flange, a 1.36 in (34.5 mm) web and a 2.44 in (62.0 mm) flange, and weighs 441 lb/ft (656.3 kg/m). Area 130 in² (83,871 mm²); strong-axis Ix = 32,100 in⁴ (1,336,102.9 cm⁴), Sx = 1,650 in³ (27,038.7 cm³), Zx = 1,910 in³ (31,299.3 cm³).
- dDepth
- 988.1 mm38.9 in38.9 in988.1 mm
- bfFlange width
- 431.8 mm17 in17 in431.8 mm
- twWeb thickness
- 34.5 mm1.36 in1.36 in34.5 mm
- tfFlange thickness
- 62.0 mm2.44 in2.44 in62.0 mm
Drawing
W36×441 specifications
| dDepth | 38.9 in988.1 mm |
|---|---|
| bfFlange width | 17 in431.8 mm |
| twWeb thickness | 1.36 in34.5 mm |
| tfFlange thickness | 2.44 in62.0 mm |
| kDesign value | 3.39 in86.1 mm |
| kDetailing value | 3 3/4 in95.3 mm |
| k1Detailing value | 1 7/8 in47.6 mm |
| WWeight | 441 lb/ft656.3 kg/m |
| AArea | 130 in²83,871 mm² |
| IxMoment of inertia, strong axis | 32,100 in⁴1,336,102.9 cm⁴ |
| ZxPlastic modulus, strong axis | 1,910 in³31,299.3 cm³ |
| SxSection modulus, strong axis | 1,650 in³27,038.7 cm³ |
| rxRadius of gyration, strong axis | 15.7 in398.8 mm |
| IyMoment of inertia, weak axis | 1,990 in⁴82,830.1 cm⁴ |
| ZyPlastic modulus, weak axis | 368 in³6,030.4 cm³ |
| SySection modulus, weak axis | 235 in³3,851 cm³ |
| ryRadius of gyration, weak axis | 3.92 in99.6 mm |
| JTorsional constant | 194 in⁴8,074.89 cm⁴ |
| bf/2tfFlange slenderness | 3.48 |
| h/twWeb slenderness | 23.6 |
| Metric designation | W920×656 |
Also known as
W920×656
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.