W14×665 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×665 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 21.6 in (548.6 mm) deep with a 17.7 in (449.6 mm) flange, a 2.83 in (71.9 mm) web and a 4.52 in (114.8 mm) flange, and weighs 665 lb/ft (989.6 kg/m). Area 196 in² (126,451 mm²); strong-axis Ix = 12,400 in⁴ (516,127 cm⁴), Sx = 1,150 in³ (18,845.1 cm³), Zx = 1,480 in³ (24,252.9 cm³).
- dDepth
- 548.6 mm21.6 in21.6 in548.6 mm
- bfFlange width
- 449.6 mm17.7 in17.7 in449.6 mm
- twWeb thickness
- 71.9 mm2.83 in2.83 in71.9 mm
- tfFlange thickness
- 114.8 mm4.52 in4.52 in114.8 mm
Drawing
W14×665 specifications
| dDepth | 21.6 in548.6 mm |
|---|---|
| bfFlange width | 17.7 in449.6 mm |
| twWeb thickness | 2.83 in71.9 mm |
| tfFlange thickness | 4.52 in114.8 mm |
| kDesign value | 5.12 in130.0 mm |
| kDetailing value | 5 13/16 in147.6 mm |
| k1Detailing value | 2 5/8 in66.7 mm |
| WWeight | 665 lb/ft989.6 kg/m |
| AArea | 196 in²126,451 mm² |
| IxMoment of inertia, strong axis | 12,400 in⁴516,127 cm⁴ |
| ZxPlastic modulus, strong axis | 1,480 in³24,252.9 cm³ |
| SxSection modulus, strong axis | 1,150 in³18,845.1 cm³ |
| rxRadius of gyration, strong axis | 7.98 in202.7 mm |
| IyMoment of inertia, weak axis | 4,170 in⁴173,568.5 cm⁴ |
| ZyPlastic modulus, weak axis | 730 in³11,962.6 cm³ |
| SySection modulus, weak axis | 472 in³7,734.7 cm³ |
| ryRadius of gyration, weak axis | 4.62 in117.3 mm |
| JTorsional constant | 1,120 in⁴46,617.92 cm⁴ |
| bf/2tfFlange slenderness | 1.95 |
| h/twWeb slenderness | 4 |
| Metric designation | W360×990 |
Also known as
W360×990
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.