W14×605 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×605 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 20.9 in (530.9 mm) deep with a 17.4 in (442.0 mm) flange, a 2.6 in (66.0 mm) web and a 4.16 in (105.7 mm) flange, and weighs 605 lb/ft (900.3 kg/m). Area 178 in² (114,838 mm²); strong-axis Ix = 10,800 in⁴ (449,529.9 cm⁴), Sx = 1,040 in³ (17,042.5 cm³), Zx = 1,320 in³ (21,630.9 cm³).
- dDepth
- 530.9 mm20.9 in20.9 in530.9 mm
- bfFlange width
- 442.0 mm17.4 in17.4 in442.0 mm
- twWeb thickness
- 66.0 mm2.6 in2.6 in66.0 mm
- tfFlange thickness
- 105.7 mm4.16 in4.16 in105.7 mm
Drawing
W14×605 specifications
| dDepth | 20.9 in530.9 mm |
|---|---|
| bfFlange width | 17.4 in442.0 mm |
| twWeb thickness | 2.6 in66.0 mm |
| tfFlange thickness | 4.16 in105.7 mm |
| kDesign value | 4.76 in120.9 mm |
| kDetailing value | 5 7/16 in138.1 mm |
| k1Detailing value | 2 1/2 in63.5 mm |
| WWeight | 605 lb/ft900.3 kg/m |
| AArea | 178 in²114,838 mm² |
| IxMoment of inertia, strong axis | 10,800 in⁴449,529.9 cm⁴ |
| ZxPlastic modulus, strong axis | 1,320 in³21,630.9 cm³ |
| SxSection modulus, strong axis | 1,040 in³17,042.5 cm³ |
| rxRadius of gyration, strong axis | 7.8 in198.1 mm |
| IyMoment of inertia, weak axis | 3,680 in⁴153,173.2 cm⁴ |
| ZyPlastic modulus, weak axis | 652 in³10,684.4 cm³ |
| SySection modulus, weak axis | 423 in³6,931.7 cm³ |
| ryRadius of gyration, weak axis | 4.55 in115.6 mm |
| JTorsional constant | 869 in⁴36,170.51 cm⁴ |
| bf/2tfFlange slenderness | 2.09 |
| h/twWeb slenderness | 4.4 |
| Metric designation | W360×900 |
Also known as
W360×900
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.